Electric lifting magnet

 

 Electric-Magnetic-Lifter-UAE-Oman-Saudi-Arabia-dubai-sharjah-Ajman-AfricaElectric lifting magnet

MADE IN USA

FEATURES:

As the Electric Magnetic Lifter Systems is useful in wide range for lift the Material, such as steel plates, workpiece, machine parts, molds iron material etc.. The above items can be use alone like as ELD-S, ELD-S (Single type), and also can be combine many piece of lifter together in
use like as ELC, ELD. These Electric Lifter systems must be cooperate continual electric power to operate. The lifter working rate at 50% Effective Duts by cycle of repeating to electrify for 5 minutes and to pause for 5 minutes. These type can be cooperate the robot and connect in computer program for pick up and down the workpiece, such as CNC machine.
Easy to operate and increase working efficient very much.

Round Lifting Electromagnets are intended to lift solid, compact material such as billets, steel plate, bars, forgings, etc. Standard units are not intended for handling scrap or small parts. Can be used individually or in multiples on a spreader bar. Consult factory for these applications.

Blackestone Round Lifting magnets UAERectifier controllers can be mounted on magnets #EM-6 thru #EM-20. A remote control switch with 6′-0″ cord is optional on all units with rectifiers.

Lifting capacities shown are for low carbon steel at magnetic saturation with a surface finish equivalent to cold rolled steel. All ratings include a 2:1 safety factor. Do not exceed rated capacity. The capacity available from From 1000 LBS (453.56 KGS)  up to 12000 LBS (5443.11Kgs)  and Supply can done in 110 volt as well as 220 volts as per the requirements.play-video-youtube-blackestone

Model Volts D.C. Watts Lift Capacity A (inches) B (inches) C (inches) Net Weight lbs
EM-6 110 85 1000 lbs 3 6 6 25
EM-8 110 130 2000 lbs 4-1/8 8 7-3/8 48
EM-10 110 170 3000 lbs 4-3/8 10 8-3/8 86
EM-12 110 200 4500 lbs 5-1/4 12 9-1/4 146
EM-16 110 310 8000 lbs 6-3/4 16 12-3/4 360
EM-20 110 570 12,000 lbs 7-1/2 20 14 540